Saturday, March 31, 2012

Parts Unlimited Trailerable Custom Fit Snowmobile Cover 6018 , 2010 Arctic Cat M1000 EFI 162" Sno Pro, 2010-2011 Arctic Cat M6 EFI 153", 2010-2011 Arctic Cat M8 153, 2010 Arctic Cat M8 153" Limited, 2010 Arctic Cat M8 EFI 153", 2010 Arctic Cat M8 EFI 153" Sno Pro, 2010-2011 Arctic Cat M8 HCR 153"

Parts Unlimited Trailerable Custom Fit Snowmobile Cover 6018 , 2010 Arctic Cat M1000 EFI 162" Sno Pro, 2010-2011 Arctic Cat M6 EFI 153", 2010-2011 Arctic Cat M8 153, 2010 Arctic Cat M8 153" Limited, 2010 Arctic Cat M8 EFI 153", 2010 Arctic Cat M8 EFI 153" Sno Pro, 2010-2011 Arctic Cat M8 HCR 153" Review



Parts Unlimited Trailerable Custom Fit Snowmobile Cover 6018 , 2010 Arctic Cat M1000 EFI 162" Sno Pro, 2010-2011 Arctic Cat M6 EFI 153", 2010-2011 Arctic Cat M8 153, 2010 Arctic Cat M8 153" Limited, 2010 Arctic Cat M8 EFI 153", 2010 Arctic Cat M8 EFI 153" Sno Pro, 2010-2011 Arctic Cat M8 HCR 153" Feature

  • See complete description and fitment information below.
Leading the industry in advanced technology and design. Heavy 600-denier polyester fabric with water/mildew-resistant treatment. Cover features a built-in soft liner on panels that make contact with the windshield and painted areas. Double-sewn seams. Adjustable tie straps for secure installation. Over cover body strap to accommodate multiple windshield heights and accessories such as risers and hooks. Vented to reduce moisture during storage and reduce under-cover turbulence during trailering. Sewn in handlebar reinforcements. Zippered gas cap opening for fueling. All models have a 3/4 adjustable perimeter webbing with a quick disconnect side release buckle. Printed graphics on the vent and gas cap opening area for a finishing touch. Protect your sled against adverse winter weather; not recommended for long term outside summer storage. Made in the U.S.A. This item fits the following models:
  • 2010 Arctic Cat M1000 EFI 162" Sno Pro
  • 2010-2011 Arctic Cat M6 EFI 153"
  • 2010-2011 Arctic Cat M8 153
  • 2010 Arctic Cat M8 153" Limited
  • 2010 Arctic Cat M8 EFI 153"
  • 2010 Arctic Cat M8 EFI 153" Sno Pro
  • 2010-2011 Arctic Cat M8 HCR 153"


  • Thursday, March 29, 2012

    Parts Unlimited Trailerable Custom Fit Snowmobile Cover 6018 , 2010 Arctic Cat M1000 EFI 162" Sno Pro, 2010-2011 Arctic Cat M6 EFI 153", 2010-2011 Arctic Cat M8 153, 2010 Arctic Cat M8 153" Limited, 2010 Arctic Cat M8 EFI 153", 2010 Arctic Cat M8 EFI 153" Sno Pro, 2010-2011 Arctic Cat M8 HCR 153"

    Parts Unlimited Trailerable Custom Fit Snowmobile Cover 6018 , 2010 Arctic Cat M1000 EFI 162" Sno Pro, 2010-2011 Arctic Cat M6 EFI 153", 2010-2011 Arctic Cat M8 153, 2010 Arctic Cat M8 153" Limited, 2010 Arctic Cat M8 EFI 153", 2010 Arctic Cat M8 EFI 153" Sno Pro, 2010-2011 Arctic Cat M8 HCR 153" Review



    Parts Unlimited Trailerable Custom Fit Snowmobile Cover 6018 , 2010 Arctic Cat M1000 EFI 162" Sno Pro, 2010-2011 Arctic Cat M6 EFI 153", 2010-2011 Arctic Cat M8 153, 2010 Arctic Cat M8 153" Limited, 2010 Arctic Cat M8 EFI 153", 2010 Arctic Cat M8 EFI 153" Sno Pro, 2010-2011 Arctic Cat M8 HCR 153" Feature

    • See complete description and fitment information below.
    Leading the industry in advanced technology and design. Heavy 600-denier polyester fabric with water/mildew-resistant treatment. Cover features a built-in soft liner on panels that make contact with the windshield and painted areas. Double-sewn seams. Adjustable tie straps for secure installation. Over cover body strap to accommodate multiple windshield heights and accessories such as risers and hooks. Vented to reduce moisture during storage and reduce under-cover turbulence during trailering. Sewn in handlebar reinforcements. Zippered gas cap opening for fueling. All models have a 3/4 adjustable perimeter webbing with a quick disconnect side release buckle. Printed graphics on the vent and gas cap opening area for a finishing touch. Protect your sled against adverse winter weather; not recommended for long term outside summer storage. Made in the U.S.A. This item fits the following models:
  • 2010 Arctic Cat M1000 EFI 162" Sno Pro
  • 2010-2011 Arctic Cat M6 EFI 153"
  • 2010-2011 Arctic Cat M8 153
  • 2010 Arctic Cat M8 153" Limited
  • 2010 Arctic Cat M8 EFI 153"
  • 2010 Arctic Cat M8 EFI 153" Sno Pro
  • 2010-2011 Arctic Cat M8 HCR 153"


  • Sunday, March 25, 2012

    Parts Unlimited Trailerable Custom Fit Snowmobile Cover 6018 , 2010 Arctic Cat M1000 EFI 162" Sno Pro, 2010-2011 Arctic Cat M6 EFI 153", 2010-2011 Arctic Cat M8 153, 2010 Arctic Cat M8 153" Limited, 2010 Arctic Cat M8 EFI 153", 2010 Arctic Cat M8 EFI 153" Sno Pro, 2010-2011 Arctic Cat M8 HCR 153"

    Parts Unlimited Trailerable Custom Fit Snowmobile Cover 6018 , 2010 Arctic Cat M1000 EFI 162" Sno Pro, 2010-2011 Arctic Cat M6 EFI 153", 2010-2011 Arctic Cat M8 153, 2010 Arctic Cat M8 153" Limited, 2010 Arctic Cat M8 EFI 153", 2010 Arctic Cat M8 EFI 153" Sno Pro, 2010-2011 Arctic Cat M8 HCR 153" Review



    Parts Unlimited Trailerable Custom Fit Snowmobile Cover 6018 , 2010 Arctic Cat M1000 EFI 162" Sno Pro, 2010-2011 Arctic Cat M6 EFI 153", 2010-2011 Arctic Cat M8 153, 2010 Arctic Cat M8 153" Limited, 2010 Arctic Cat M8 EFI 153", 2010 Arctic Cat M8 EFI 153" Sno Pro, 2010-2011 Arctic Cat M8 HCR 153" Feature

    • See complete description and fitment information below.
    Leading the industry in advanced technology and design. Heavy 600-denier polyester fabric with water/mildew-resistant treatment. Cover features a built-in soft liner on panels that make contact with the windshield and painted areas. Double-sewn seams. Adjustable tie straps for secure installation. Over cover body strap to accommodate multiple windshield heights and accessories such as risers and hooks. Vented to reduce moisture during storage and reduce under-cover turbulence during trailering. Sewn in handlebar reinforcements. Zippered gas cap opening for fueling. All models have a 3/4 adjustable perimeter webbing with a quick disconnect side release buckle. Printed graphics on the vent and gas cap opening area for a finishing touch. Protect your sled against adverse winter weather; not recommended for long term outside summer storage. Made in the U.S.A. This item fits the following models:
  • 2010 Arctic Cat M1000 EFI 162" Sno Pro
  • 2010-2011 Arctic Cat M6 EFI 153"
  • 2010-2011 Arctic Cat M8 153
  • 2010 Arctic Cat M8 153" Limited
  • 2010 Arctic Cat M8 EFI 153"
  • 2010 Arctic Cat M8 EFI 153" Sno Pro
  • 2010-2011 Arctic Cat M8 HCR 153"


  • Saturday, March 24, 2012

    Mack Three Year Extended Warranty for External Storage/HD devices valued under $1000

    Mack Three Year Extended Warranty for External Storage/HD devices valued under 00 Review



    Mack Three Year Extended Warranty for External Storage/HD devices valued under 00 Feature

    • WaterProof 3 Layer Polypropylene Material
    • UV Resistant with German developed UV Stabilizer Remafin LSP 449
    • Superior performance soft abrasion-resistant material
    • Security Cable Lock w/ 3 keys Included value
    • Free Storage Bag Included value
    We sell external storage/hard drive devices assembled by the finest manufacturers in the industry. Each carries at least a 90 day warranty against defects. The Extended Warranty Program (provided by Mack) is designed to provide you with additional coverage for manufacturer defects. Whether it be Murphy's Law or just luck, malfunctions seem to happen right after the Manufacturer Warranty expires! The Mack external storage/HD Extended Warranty offers you that peace of mind for those unexpected malfunctions and costly repairs. This warranty covers all parts and labor for three (3) years after the manufacturer's warranty expires. The external storage/hard drive will be guaranteed to operate properly according to manufacturer's specifications and Mack will restore the external storage/hard drive no charge to you (including all parts and labor). When you purchase a Mack Extended Warranty, you are making a wise investment for your External Storage Device/HD. Mack Camera and Video Service, established in 1938, provides technical service for equipment ranging from 35mm Cameras to Digital Video Equipment, PDA's, DVD Players, GPS, Televisions, VCR's and Laptop Computers. Their repair facility is factory authorized for manufacturer warranty repairs and their technicians are factory trained to repair your equipment to manufacturer specifications. Get the peace of mind provided by an extended warranty on your External Storage/HD equipment. This warranty does not cover equipment which has been misused, tampered with, modified or damaged as a result of accident, liquid, sand, grit, corrosion, impact, cracked, physically broken parts, or lack of proper care as indicated in the manual of operations. This warranty does not extend to installation or adjustment at the user's location, and it does not include accessory expansion boards, all batteries, any software programs, or sensitive information data on your system. Accessorie...


    Storage Snowmobile Cover Fits Touring and 2 up Snowmobiles up to 140" in length

    Storage Snowmobile Cover Fits Touring and 2 up Snowmobiles up to 140" in length Review



    Storage Snowmobile Cover Fits Touring and 2 up Snowmobiles up to 140" in length Feature

    • 100% Waterproof, All Weather, Storage Snowmobile Cover
    • Fits Snowmobiles up to 140" in length. (Measurements from nose to tail)
    • Protects from all weather conditions. Breathable, mold and mildew resistant.
    • Elastic hem for a snug fit and strap with plastic bucke attached, to secure the cover on your snowmobile.
    • Easy to use and store. Storage bag included.Carries 2 years warranty.
    Quality, affordable, semi-custom fit snowmobile cover. Color: Black Condition: Brand New Great for indoor and outdoor storage of your Snowmobile. Made from technologically advanced, water repellent, high quality, non-abrasive nylon material. Breathable - allows heat and moisture to escape. Dust and Dirt protection. Helps reduce the fading of your snowmobile's paint. Mold and Mildew resistance. UV protection (protects your snowmobile against the harmful effects of the sun) Snowmobile Cover has a strap with plastic buckle attached, to secure the cover on your snowmobile. Cover has fully elasticized hem around the bottom of cover to ensure a tight fit. Semi-custom fit to accommodate most snowmobiles in the industry. Easy to use: Remove the cover and your snow mobile is as good as new and ready for adventure. Comes with free storage bag.


    Wednesday, March 21, 2012

    Parts Unlimited Trailerable Custom Fit Snowmobile Cover 6018 , 2010 Arctic Cat M1000 EFI 162" Sno Pro, 2010-2011 Arctic Cat M6 EFI 153", 2010-2011 Arctic Cat M8 153, 2010 Arctic Cat M8 153" Limited, 2010 Arctic Cat M8 EFI 153", 2010 Arctic Cat M8 EFI 153" Sno Pro, 2010-2011 Arctic Cat M8 HCR 153"

    Parts Unlimited Trailerable Custom Fit Snowmobile Cover 6018 , 2010 Arctic Cat M1000 EFI 162" Sno Pro, 2010-2011 Arctic Cat M6 EFI 153", 2010-2011 Arctic Cat M8 153, 2010 Arctic Cat M8 153" Limited, 2010 Arctic Cat M8 EFI 153", 2010 Arctic Cat M8 EFI 153" Sno Pro, 2010-2011 Arctic Cat M8 HCR 153" Review



    Parts Unlimited Trailerable Custom Fit Snowmobile Cover 6018 , 2010 Arctic Cat M1000 EFI 162" Sno Pro, 2010-2011 Arctic Cat M6 EFI 153", 2010-2011 Arctic Cat M8 153, 2010 Arctic Cat M8 153" Limited, 2010 Arctic Cat M8 EFI 153", 2010 Arctic Cat M8 EFI 153" Sno Pro, 2010-2011 Arctic Cat M8 HCR 153" Feature

    • See complete description and fitment information below.
    Leading the industry in advanced technology and design. Heavy 600-denier polyester fabric with water/mildew-resistant treatment. Cover features a built-in soft liner on panels that make contact with the windshield and painted areas. Double-sewn seams. Adjustable tie straps for secure installation. Over cover body strap to accommodate multiple windshield heights and accessories such as risers and hooks. Vented to reduce moisture during storage and reduce under-cover turbulence during trailering. Sewn in handlebar reinforcements. Zippered gas cap opening for fueling. All models have a 3/4 adjustable perimeter webbing with a quick disconnect side release buckle. Printed graphics on the vent and gas cap opening area for a finishing touch. Protect your sled against adverse winter weather; not recommended for long term outside summer storage. Made in the U.S.A. This item fits the following models:
  • 2010 Arctic Cat M1000 EFI 162" Sno Pro
  • 2010-2011 Arctic Cat M6 EFI 153"
  • 2010-2011 Arctic Cat M8 153
  • 2010 Arctic Cat M8 153" Limited
  • 2010 Arctic Cat M8 EFI 153"
  • 2010 Arctic Cat M8 EFI 153" Sno Pro
  • 2010-2011 Arctic Cat M8 HCR 153"


  • Tuesday, March 20, 2012

    Parts Unlimited Trailerable Custom Fit Snowmobile Cover 6018 , 2010 Arctic Cat M1000 EFI 162" Sno Pro, 2010-2011 Arctic Cat M6 EFI 153", 2010-2011 Arctic Cat M8 153, 2010 Arctic Cat M8 153" Limited, 2010 Arctic Cat M8 EFI 153", 2010 Arctic Cat M8 EFI 153" Sno Pro, 2010-2011 Arctic Cat M8 HCR 153"

    Parts Unlimited Trailerable Custom Fit Snowmobile Cover 6018 , 2010 Arctic Cat M1000 EFI 162" Sno Pro, 2010-2011 Arctic Cat M6 EFI 153", 2010-2011 Arctic Cat M8 153, 2010 Arctic Cat M8 153" Limited, 2010 Arctic Cat M8 EFI 153", 2010 Arctic Cat M8 EFI 153" Sno Pro, 2010-2011 Arctic Cat M8 HCR 153" Review



    Parts Unlimited Trailerable Custom Fit Snowmobile Cover 6018 , 2010 Arctic Cat M1000 EFI 162" Sno Pro, 2010-2011 Arctic Cat M6 EFI 153", 2010-2011 Arctic Cat M8 153, 2010 Arctic Cat M8 153" Limited, 2010 Arctic Cat M8 EFI 153", 2010 Arctic Cat M8 EFI 153" Sno Pro, 2010-2011 Arctic Cat M8 HCR 153" Feature

    • See complete description and fitment information below.
    Leading the industry in advanced technology and design. Heavy 600-denier polyester fabric with water/mildew-resistant treatment. Cover features a built-in soft liner on panels that make contact with the windshield and painted areas. Double-sewn seams. Adjustable tie straps for secure installation. Over cover body strap to accommodate multiple windshield heights and accessories such as risers and hooks. Vented to reduce moisture during storage and reduce under-cover turbulence during trailering. Sewn in handlebar reinforcements. Zippered gas cap opening for fueling. All models have a 3/4 adjustable perimeter webbing with a quick disconnect side release buckle. Printed graphics on the vent and gas cap opening area for a finishing touch. Protect your sled against adverse winter weather; not recommended for long term outside summer storage. Made in the U.S.A. This item fits the following models:
  • 2010 Arctic Cat M1000 EFI 162" Sno Pro
  • 2010-2011 Arctic Cat M6 EFI 153"
  • 2010-2011 Arctic Cat M8 153
  • 2010 Arctic Cat M8 153" Limited
  • 2010 Arctic Cat M8 EFI 153"
  • 2010 Arctic Cat M8 EFI 153" Sno Pro
  • 2010-2011 Arctic Cat M8 HCR 153"


  • Sunforce 50013 1-Watt Motorcycle and Powersports Solar Battery Charger

    Sunforce 50013 1-Watt Motorcycle and Powersports Solar Battery Charger Review



    Sunforce 50013 1-Watt Motorcycle and Powersports Solar Battery Charger Feature

    • Helps charge 12V batteries with the power of the sun
    • Works with motorcycles, personal water crafts,ATVs, snowmobiles and tractors
    • Amorphous panel works in all daylight conditions and is weatherproof for added durability
    • Built-in overcharge/discharge protection
    • Complete kit includes 8 ft of wire connected to the solar panel, 8 ft of extra wire, battery clamps, O ring connector, fuse, and Quick Connect Technology for simple installation

    The Sunforce 50013 1-Watt Power Sports Charger is the perfect solution for charging the batteries of motorcycles, personal water crafts, ATVs, snowmobiles and more. Constructed with amorphous solar cells, this solar panel is maintenance-free and extremely easy to install. With its built-in overcharge/discharge protection, this top-of-the-line solar panel works in all daylight conditions to keep your batteries charged. The complete kit includes 8 ft. of wire connected to the solar panel, 8 ft. of extra wire, battery clamps, O ring connector, fuse, and Quick Connect Technology for simple installation.

    Convenient charging for power sport vehicles
    Convenient Power That Helps Keep Your Batteries Charged

    This Sunforce solar charger lets you harness the power of the sun, the most powerful and plentiful source of energy available to us. Unlike nuclear and fossil fuels, solar power is clean and pollution-free, and the equipment requires very little maintenance to operate.

    Sunforce Solar Panels are effective in areas of both high and lower sun exposure, making them ideal for use in the United States

    The Power Sports Charger may be attached directly to your battery using either of the accessories included with the charger. Included with the charger are a set of “O” Rings as well as a set of battery clamps. Both are equipped with quick connect technology to allow quick and easy connections.

    About Amorphous Solar Power

    Solar panels convert sunlight into an electric current, they do not store power. Amorphous solar panels are created by spraying silicon onto glass in very thin layers, and are commonly known as thin film solar panels. This process allows them to be better at generating electricity in all lighting conditions, including cloudy or shady environments. They have a maximum operating temperature range of -40 to 176-degrees Fahrenheit, requiring virtually no maintenance. They can even withstand impacts from one-inch hailstones at 50 miles-per-hour.


    Amorphous Silicon key points:

    • Lightweight, portable, and shade tolerant
    • For entry to solar or hands on solar
    • Best for smaller output needs, temporary set ups, and areas that do not receive predictable sun conditions

    The Sunforce 50013 1-Watt Power Sports Charger is the perfect solution for charging the batteries of motorcycles, personal water crafts, ATVs, snowmobiles and more. Constructed with amorphous solar cells, this solar panel is maintenance-free and extremely easy to install. With its built-in overcharge / discharge protection, this top of the line solar panel works in all daylight conditions to keep your batteries charged. The complete kit includes: 8 ft. of wire connected to the solar panel, 8 ft. of extra wire, battery clamps, O ring connector, fuse, and Quick Connect Technology for simple installation.


    Saturday, March 17, 2012

    Top of the line, Heavy-duty, Storage and Trailering Snowmobile Sled Cover. Fits: 2 up, Touring style Yamaha, Polaris, Ski Doo, Arctic Cat 125"-140" in length

    Top of the line, Heavy-duty, Storage and Trailering Snowmobile Sled Cover. Fits: 2 up, Touring style Yamaha, Polaris, Ski Doo, Arctic Cat 125"-140" in length Review



    Top of the line, Heavy-duty, Storage and Trailering Snowmobile Sled Cover. Fits: 2 up, Touring style Yamaha, Polaris, Ski Doo, Arctic Cat 125"-140" in length Feature

    • Top of the line. HEavy-duty Storage and Travel (trailerable) Snowmobile Cover -Great all weather protection for your snowmobile.
    • Fits snowmobiles frpm 126"-140" in length. Measuremens taken including skis.
    • This cover has a fully elastic bottom for secure fit and to to keep the cover in place, plus it is equipped with heavy-duty nylon straps, and quick release buckles for trouble free trailering.
    • This cover has zippered fuel tank zippered door for easy fill up. Dual air vents to provide air circulation and to prevent wind lofting during trailering
    • Our cover is made of technologically advanced, durable, scratch proof, 9.5 oz Poly material. Free Storage Bag included, Includes trailering straps
    FEATURES OF OUR TRAILERABLE SNOWMOBILE COVER: Condition: Brand New. Color: 2 tone: black and grey. TRAILERABLE This cover is trailerable and can be used on the road while trailering your Snowmobile. All Weather indoor and outdoor protection: Our Snowmobile cover is water resistant, 100% breathable and provides a great protection from: Snow, dust, dirt, mold, mildew, sun, rain and other corruptive elements. Technologically advanced Durable Poly material: Made from Technologically advanced 9.5 oz, scratch proof, uv treated, Poly fabric to protect fine finishes. Zippered fuel tank access door For an easy fill up.Dual (2) Air Vents To eliminate moisture and prevent wind lofting during trailering. Fully Elasticized elastic hem around the bottom: There is a bungee cord sewn at the bottom of the cover to provide a secure fit. Built-in Trailering system Cover has integrated tie down straps with quick release buckles to keep cover secure while trailering or storing your Snowmobile. Oversized, Storage Bag included: For convenient storage of your cover, when not is use. Dust Protection: Our cover shields your Snowmobile from fine dust. Whether indoors or out, when dust sits on your paint it turns abrasive and causes scratches.


    Friday, March 16, 2012

    GRAY HEAVY DUTY WATERPROOF MOORING BOAT COVER FITS LENGTH 20' 21' 22' SUPERIOR TRAILERABLE BOAT COVERS 300 DENIER V-HULL FISHING SKI BOAT RUNABOUT PRO BASS INBOARD OUTBOARD BOAT COVERS

    GRAY HEAVY DUTY WATERPROOF MOORING BOAT COVER FITS LENGTH 20' 21' 22' SUPERIOR TRAILERABLE BOAT COVERS 300 DENIER V-HULL FISHING SKI BOAT RUNABOUT PRO BASS INBOARD OUTBOARD BOAT COVERS Review



    GRAY HEAVY DUTY WATERPROOF MOORING BOAT COVER FITS LENGTH 20' 21' 22' SUPERIOR TRAILERABLE BOAT COVERS 300 DENIER V-HULL FISHING SKI BOAT RUNABOUT PRO BASS INBOARD OUTBOARD BOAT COVERS Feature

    • Fits: 20', 21', 22' Feet Length
    • V-Hull Runabouts and V-Hull Pro-Style Bass Boats, Fish, Ski, I/O Boats (Excluding Cuddy Cabin)
    • Color: Gray
    • Trailerable: Trailering straps for quick and easy tie down and protection
    • FREE storage mesh bag

    This 300 Denier Polyester Boat Cover is waterproof and has UV coated protection. The heavy-duty shock cord hem ensures a tight, secure fit.


    FEATURES INCLUDE:

    • Rugged 300 Denier Polyester
    • UV treated for long term protection
    • Waterproof
    • QuikSnap strapping system for fast/easy fit and trailering
    • Heavy Duty Shock Cord Hem for secure fit
    • Storage bag included
    • Gray Color
    • One Year Warranty


    Fits: 20'-22' V-Hull/Tri-Hull Runabouts/Aluminum Bass Boats w/Beam Width Up To 100"

     


    Thursday, March 15, 2012

    Durable, Great Quality, Storage and Trailering Snowmobile Sled Cover. Fits: 2 up, Touring style Yamaha, Polaris, Ski Doo, Arctic Cat 125"-140" in length

    Durable, Great Quality, Storage and Trailering Snowmobile Sled Cover. Fits: 2 up, Touring style Yamaha, Polaris, Ski Doo, Arctic Cat 125"-140" in length Review



    Durable, Great Quality, Storage and Trailering Snowmobile Sled Cover. Fits: 2 up, Touring style Yamaha, Polaris, Ski Doo, Arctic Cat 125"-140" in length Feature

    • Storage and Travel (trailerable) Snowmobile Cover -Great all weather protection for your snowmobile.
    • Fits snowmobiles frpm 126"-140" in length. Measuremens taken including skis.
    • Our travel snowmobile covers are manufactured from technologically advanced 300 Denier, high quality, polyester material to protect your snowmobiles all year round.
    • This snowmobile cover is durable and has been designed to provide resistance to mold, mildew, sun, ice, snow, dust, dirt as well as other environmental hazards.
    • 2 Years Warranty, Free Storage Bag included, Includes trailering straps
    Color: Black Condition: Brand New Great Indoor and outdoor protection for your Snowmobile. The snowmobile cover is trailer able and can be used on the road while trailering your sled. Made from Technologically advanced 300 Denier All Weather Polyester material. Helps reduce the fading of your snowmobile's paint. Rain resistance and Snow protection. Dust and Dirt protection. Mold and Mildew resistance. UV protection (protects your snowmobile against the harmful effects of the sun) 6 Tie Down straps to keep snowmobile cover secure during transport or for storage indoors and out. Cover has fully elasticized hems around the bottom of cover to ensure a tight fit. Semi-custom fit to accommodate most snowmobiles in the industry. Easy to use: Remove the cover and your snow mobile is as good as new and ready for adventure.


    Mack 3 Year for External Storage Device / Hard Drive, for Items with a Retail Value of up to $1000.00

    Mack 3 Year for External Storage Device / Hard Drive, for Items with a Retail Value of up to 00.00 Review



    Mack 3 Year for External Storage Device / Hard Drive, for Items with a Retail Value of up to 00.00 Feature

    • WaterProof 3 Layer Polypropylene Material
    • UV Resistant with German developed UV Stabilizer Remafin LSP 449
    • Superior performance soft abrasion-resistant material
    • Security Cable Lock w/ 3 keys Included value
    • Free Storage Bag Included value
    This warranty is an extension of the manufacturer's normal warranty on the Storage Device /for an additional period of 3 (three) years. The Storage Device / Hard Drive will be guaranteed to operate properly according to manufacturer's specifications or Mack shall repair equipment to operate properly, at no charge to you. Mack Camera's (Worldwide) Extended Warranty is designed to provide you with additional coverage for manufacturer defects. Whether it be Murphy's Law or just "luck", electrical malfunctions seem to take place the day after the Manufacturer Warranty expires. The Mack Camera Extended Warranty offers you that peace of mind for those unexpected malfunctions and costly repairs. When you purchase a Mack Camera Extended Warranty, you are truly making a smart investment for your equipment. Mack Camera and Video Service, established in 1938, has been a leading repair center in the Tri-State area for over 60 years. Mack Camera currently services equipment ranging from 35mm Cameras to Digital Video Equipment, PDA's, DVD Players, Televisions, VCR's and Laptop Computers. Their repair facility is factory authorized for manufacturer warranty repairs and their technicians are factory trained to repair your equipment to manufacturer specifications. By working with Mack Camera and Video Service you are investing in a customized repair and service program for your new equipment. Worldwide Coverage Mack Camera Extended Warranties now cover


    Wednesday, March 14, 2012

    GRAY HEAVY DUTY WATERPROOF MOORING BOAT COVER FITS LENGTH 14' 15' 16' SUPERIOR TRAILERABLE BOAT COVERS 300 DENIER V-HULL FISHING ALUMINUM SKI BOAT RUNABOUT PRO BASS INBOARD OUTBOARD BOAT COVERS

    GRAY HEAVY DUTY WATERPROOF MOORING BOAT COVER FITS LENGTH 14' 15' 16' SUPERIOR TRAILERABLE BOAT COVERS 300 DENIER V-HULL FISHING ALUMINUM SKI BOAT RUNABOUT PRO BASS INBOARD OUTBOARD BOAT COVERS Review



    GRAY HEAVY DUTY WATERPROOF MOORING BOAT COVER FITS LENGTH 14' 15' 16' SUPERIOR TRAILERABLE BOAT COVERS 300 DENIER V-HULL FISHING ALUMINUM SKI BOAT RUNABOUT PRO BASS INBOARD OUTBOARD BOAT COVERS Feature

    • Fits: 14', 15', 16' Feet Length
    • V-Hull & Tri-Hull Runabouts, Aluminum Bass boats, Fish, Ski, I/O Boats (Excluding Cuddy Cabin)
    • Color: Gray
    • Trailerable: Trailering straps for quick and easy tie down and protection
    • FREE storage mesh bag

    This 300 Denier Polyester Boat Cover is waterproof and has UV coated protection. The heavy-duty shock cord hem ensures a tight, secure fit.


    FEATURES INCLUDE:

    • Rugged 300 Denier Polyester
    • UV treated for long term protection
    • Waterproof
    • QuikSnap strapping system for fast/easy fit and trailering
    • Heavy Duty Shock Cord Hem for secure fit
    • Storage bag included
    • Gray Color
    • One Year Warranty


    Fits: 14'-16' V-Hull/Tri-Hull Runabouts/Aluminum Bass Boats w/Beam Width Up To 90"

     


    Tuesday, March 13, 2012

    GRAY HEAVY DUTY WATERPROOF MOORING BOAT COVER FITS LENGTH 12' 13' 14' SUPERIOR TRAILERABLE BOAT COVERS 300 DENIER V-HULL FISHING ALUMINUM SKI BOAT PRO BASS INBOARD OUTBOARD BOAT COVERS

    GRAY HEAVY DUTY WATERPROOF MOORING BOAT COVER FITS LENGTH 12' 13' 14' SUPERIOR TRAILERABLE BOAT COVERS 300 DENIER V-HULL FISHING ALUMINUM SKI BOAT PRO BASS INBOARD OUTBOARD BOAT COVERS Review



    GRAY HEAVY DUTY WATERPROOF MOORING BOAT COVER FITS LENGTH 12' 13' 14' SUPERIOR TRAILERABLE BOAT COVERS 300 DENIER V-HULL FISHING ALUMINUM SKI BOAT PRO BASS INBOARD OUTBOARD BOAT COVERS Feature

    • Fits: 12', 13', 14' Feet Length
    • V-Hull & Tri-Hull Runabouts, Aluminum Bass boats, Fish, Ski, I/O Boats (Excluding Cuddy Cabin)
    • Color: Gray
    • Trailerable: Trailering straps for quick and easy tie down and protection
    • FREE storage mesh bag

    This 300 Denier Polyester Boat Cover is waterproof and has UV coated protection. The heavy-duty shock cord hem ensures a tight, secure fit.


    FEATURES INCLUDE:

    • Rugged 300 Denier Polyester
    • UV treated for long term protection
    • Waterproof
    • QuikSnap strapping system for fast/easy fit and trailering
    • Heavy Duty Shock Cord Hem for secure fit
    • Storage bag included
    • Gray Color
    • One Year Warranty


    Fits: 12'-14' V-Hull/Tri-Hull Runabouts/Aluminum Bass Boats w/Beam Width Up To 68"

     


    BLACK HEAVY DUTY WATERPROOF MOORING BOAT COVER FITS LENGTH 12' 13' 14' SUPERIOR TRAILERABLE BOAT COVERS 300 DENIER V-HULL FISHING ALUMINUM SKI BOAT PRO BASS INBOARD OUTBOARD BOAT COVERS

    BLACK HEAVY DUTY WATERPROOF MOORING BOAT COVER FITS LENGTH 12' 13' 14' SUPERIOR TRAILERABLE BOAT COVERS 300 DENIER V-HULL FISHING ALUMINUM SKI BOAT PRO BASS INBOARD OUTBOARD BOAT COVERS Review



    BLACK HEAVY DUTY WATERPROOF MOORING BOAT COVER FITS LENGTH 12' 13' 14' SUPERIOR TRAILERABLE BOAT COVERS 300 DENIER V-HULL FISHING ALUMINUM SKI BOAT PRO BASS INBOARD OUTBOARD BOAT COVERS Feature

    • Fits: 12', 13', 14' Feet Length
    • V-Hull & Tri-Hull Runabouts, Aluminum Bass boats, Fish, Ski, I/O Boats (Excluding Cuddy Cabin)
    • Color: Black
    • Trailerable: Trailering straps for quick and easy tie down and protection
    • FREE storage mesh bag

    Fits: 12’, 13', 14’ Feet Length

    V-Hull & Tri-Hull Runabouts, Aluminum Bass boats, Fish, Ski, I/O Boats (Excluding Cuddy Cabin)

    Max Length 14'6" / Max Beam Width 68"

     

    • Water repellent and breathable fabric
    • 6 oz., 300D Polyester Oxford w/PU Coating to protect from UV and Mildew
    • Includes all straps for trailering
    • Double needle stitched seams w/dual strength thread for durability
    • 23 meters white rope included for cover tie down and attach to trailer
    • Bow and Stern reinforced for extra strength and protection
    • Free storage mesh bag
    • Black Color

    Climate Covers provide a high level of protection for indoor and outdoor boat storage. They are constructed from heavy-duty 300D marine grade polyester and cotton blend fabric that makes them water repellent and mildew resistant for unmatched storage quality. This material also allows your boat to breath, eliminating any sweating inside your boat and therefore eliminating any mould or smells. No other boat cover design or material quality comes close. In addition, we include a free mesh storage bag so water can drain out completely when storing your cover.


    Monday, March 12, 2012

    Shappell Jet Sled Jr.

    Shappell Jet Sled Jr. Review



    Shappell Jet Sled Jr. Feature

    • Shappell® Jet Sled® Jr. polyethylene multi-purpose sled
    • Model: JSR-ATC
    • ATC™ All-Terrain Camo
    • Molded runners for strength and stability
    • Optional hitches allow towing by ATV or snowmobile
    The rugged polyethylene Jet Sled® Jr. from Shappell® is designed with molded runners for strength and stability. Optional hitches allow towing by an ATV or snowmobile.